3M™ P2 PARTICULATE FILTER FOR DUST 5925 | PAIR | 10 PAIRS PER PACK SOLD BY PACK ONLY For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood, concrete and mist droplets from spraying To be used when needing protection against dusts, mists (including oil based particles) and fumes when fitted to 6000 series cartridge with the 501 retainer. Particulate Mask Respirator Filter is lightweight and provides low breathing resistance. It is made from 3M high performance filter media for effective filtration efficiency. Suitable for use with 3M 6000/7500 Series Half Face Respirators and 3M 6000/7000 Series Full Face Respirators Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels “ This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES Meets the performance requirements of AS/NZS 1716:2012. What is a P2 Rating? P2 is a respiratory filter rating under the AS/NZS1716 standards for use in Australia and New Zealand. Protects against mechanically and thermally generated particles. Filtration rate: Filters at least 94% of airborne particles Suitable for: Relatively small particles generated by mechanical processes eg. grinding, cutting, sanding, drilling & sawing Sub-micron thermally generated particles e.g. metal & welding fumes, fertilizer and bushfire smoke, diesel exhaust & smoke and acid gases Biologically active airborne particles under specified infection control applications e.g. viruses, bacteria, COVID-19, SARS, bioaerosols & fungus How long will cartridges and filters last on the shelf and in use? Stored unopened in the original packaging, 3M cartridges and filters will last five years. Once removed from their packaging, replace them after six months. The service life of cartridges and filters depends on a number of factors including the type and number of contaminants in the air, the breathing rate of the wearer, ventilation, humidity and respirator storage. Gas and vapour cartridges must be changed when contamination can be detected coming through cartridge by smell or taste. Particulate filters must be changed when breathing resistance increases and becomes uncomfortable. Click here to view the 3M Reusable Respirator Catalogue Click here to view the 3M 5925 Filter Technical Data Sheet
